|Place of Origin:||CANGZHOU,HEBEI,CHINA|
|Model Number:||910 Model|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipment will be moisture-proof, anti corrosive, and will not be damaged during transportation.|
|Delivery Time:||The seller guarantees the equipment will be ready for shipment within 30 working days after receipt of deposit from the buyer|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||15 Sets per month|
|Panel Profile:||We Can Customize Based On You Need||Color Of Machine:||Can Do Based On Client's Requirement|
|Control System:||Full Automatic Control||Forming Speed:||0-8m/min|
Decoiler—Roll Forming Machine——Control System——Hydraulic cutter--------Receiving table .
This machine takes GI/PPGI as raw material, through a series steps and can produce the metal roofing sheets. The inverter controls the motor speed, the PLC system controls length and quantity automatically, therefore, the machine achieves a continuous automatic production, which is the ideal equipment for cold roll forming industry.Most people use this kind steel panel for factory roof, house roof and warehouse and so on.
|Article No.||Item Name||Specification|
|1||Feeding width||1200mm ( we also can customize based on you need)|
|2||Thickness of Raw material||0.3mm-0.8mm PPGI,GI|
|3||Roller station||24 steps|
|4||Shaft Diameter||75 mm|
|6||Rollers' material||45# Steel with chrome coated|
|7||Shaft material||45# Steel with chrome coated|
|10||Voltage||380V 50Hz 3phases ( also can do based on you need)|
|11||Control system||PLC control system|
|12||Decoiler weight capacity||5 Tons|
|14||Driving way||Chain transmission|
|15||Chain size||1.0 inch|
|16||Cutting system||Hydraulic Automatic hydraulic cutter+Front cutter to reduce raw material waste|
(1) Adopts post cutting, Stop to cut.Advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.
(2) Cutting mold:Cr12 with heat treated ,can be adjusted freely .
(3) Cutting length tolerance ±2mm. The power of cutting is provided by hydraulic station.
(4) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the product automatically. Finish this action, machine will run again continuously.
(5) 1 set hydraulic pump
(6) Include a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes(It supplies the power for the hydraulic cutter). And two sets of electromagnetism valves.